SENSORAY Model 616

SENSORAY Model 616
Contact us for more information

Features

  • Real time MPEG-1/MPEG-2 encoding/decoding
  • NTSC/PAL video + stereo audio
  • Uncompressed preview images
  • Text overlay
  • 2 TTL inputs, 2 output relays

Model 616 is a PCI frame grabber that captures and transfers full-frame (640x480) video at 30 frames per second. It uses hardware compression to produce encoded MPEG-2 and MPEG-1 data streams of 100 kbits to 10 Mbits per second. It also has two audio input channels that are synchronized to the MPEG data.

SENSORAY Mode l616 blockdiagram

Advantages
MPEG-2 data reduces the amount of memory required to store full-motion video. The compressed data requires a smaller transmission bandwidth. This makes it possible to transmit 30 frames/second video over a 10/100 Base-T Ethernet. The hardware compression circuit uses a motion estimation algorithm to produce smooth images from interlaced cameras. The length of MPEG-2 video streams is not limited by the viewing software.

Real-time viewing
The uncompressed video stream may be displayed in real-time on the host computer's monitor while the MPEG circuit is compressing it. Uncompressed video is sent directly to the graphic adapter's video memory under the control of Video for Linux.

Decompression
Encoded MPEG-2 data can also be decompressed by the 616's hardware to produce composite video and audio. The video output is also available as S-video. The audio output is available at an audio jack on the hold-down bracket.

Digital I/O
Two optically coupled inputs and two relay outputs share a common terminal black on the hold-down bracket. The relay outputs can be configured as normally open or normally closed.

SENSORAY Model 616 digital io

Text caption buffer
A 32-character buffer is available for adding text to each frame. The text is within a transparent box that may be positioned anywhere within the frame.

Self test
Digitized video and audio inputs can be looped back to the output circuits to allow camera and sound adjustments. The 616's video D/A can be programmed to generate color test bars. This is useful for testing the video output channel.

Video outputs
In addition to the MPEG data stream, two types of uncompressed video output are available. The digitized video input may be looped back to the 616's digital-to-analog converter to produce composite and S-video outputs. These analog signals will contain the text in the caption buffer.

The uncompressed images are also available over the PCI bus. The 616's driver can optionally write full-size images directly to the host's video memory. This allows previewing the camera stream while the MPEG stream is recorded to the host's main memory.

Lost video detection
The status of the camera's vertical and horizontal sync signals may be used to detect the presence or absence of the camera signal. The included software allows reading these signals to detect a lost video signal.

Specifications

Power input 3.3 volts, 280 mA
Capture rate 30 frames/sec (NTSC, RS-170, CCIR), 25 frames/sec (PAL)
A/D resolution 8-bits for luminance, 8-bits for chrominance
Input Resolution 704 x 480 (NTSC), 704 x 576 (PAL)
Output resolution 768 x 576 (PAL), 704 x 480 (NTSC, RS-170)
Video inputs Composite or S-video
Video output PAL or NTSC from a BNC connector
Output data MPEG2 streaming data at rates of 100 kbits to 10Mbits/second
Text overlay 32 characters
616’s/computer 3
Audio input & output +/- 1.0 volt
Digital I/O 2 opto inputs, 2 relay outputs
Board size 5.5” x 4.2”
Bus standard PC1 2.1
Address mapping Memory mapped
Supported streams Elementary, Program, Transport