Skip to main content

SENSORAY Model 1012 8-channel frame grabber with audio capture

SENSORAY Model 1012 8-channel frame grabber with audio capture

Features

  • Simultaneously captures 8 composite video + 8 analog audio
  • 8 NTSC/PAL inputs captured to YUYV, UYVY, RGB555, or RGB565
  • 8 audio inputs captured to PCM
  • Real-time image resize and H/V flip
  • Ultra-compact footprint

Model 1012 is a Mini PCIe board that simultaneously captures up to eight NTSC/PAL composite video and eight mono analog audio signals. Each of its eight identical channels captures uncompressed video at full frame rate and uncompressed audio at up to 48 kHz.

SENSORAY Model1012 blockdiagram

All operating power is supplied by the Mini PCIe bus, and the board's single-lane (x1) interface allows it to be plugged into any Mini PCIe slot. The 1012's tiny footprint and high performance make it ideally suited for surveillance and other applications in which multiple video and audio signals must be captured at the same time.

Video
The eight video inputs can accept up to eight NTSC or PAL signals (all signals must be same type). Each channel captures uncompressed video at full frame rate (30 fps NTSC, 25 fps PAL), resulting in an aggregate capture rate of up to 240 fps (NTSC) or 200 fps (PAL), at up to D1 resolution.

The image resizer supports a variety of common resolutions, and images can be flipped horizontally, vertically or both. Captured frames may be formatted as YUYV, UYVY, RGB555, or RGB565.

Audio
Each line-level audio input is captured in PCM format, at a sampling rate of 8, 16, 42, 44.1 or 48 kHz.

Connectors
Two 16-pin headers (Molex 87831-1620) are used to connect the audio and video inputs to external circuitry. Each header provides access to all audio inputs and four of the eight video inputs.

Software
Software Development Kits (SDK) are available for Linux and Windows. The SDKs include drivers, programming samples, and comprehensive documentation to enable programmers to quickly develop custom applications.

Performance
Due to the extremely high data rates involved, a computer with sufficient bandwidth and processing power is required to ensure error-free processing of the video streams produced by Model 1012.

SENSORAY bundles chipset drivers for both Linux and Windows. The Linux driver is high performance and makes possible simultaneous full frame rate capture at D1 resolution from all eight inputs. The Windows driver has lower performance that may impose tradeoffs between the number of active channels and resolution.

The following table shows combinations of channels and resolutions that will reliably result in error-free processing on a typical modern, high performance PC. In general, higher channel counts and resolutions require a higher performance computer. See Performance Benchmarks for examples of the actual performance observed on various computers.

Maximum channels vs. resolution

DriverStreaming video channelsResolutionFrames/second per channel
NTSCPAL
Linux 1 - 8 VGA, 4SIF/4CIF, D1, or smaller 30 25
Windows 1 - 4 VGA, 4SIF/4CIF, D1, or smaller 30 25
5 - 8 QVGA, SIF, CIF, or smaller 30 25

In the case of PCs with an Intel chipset, a plug-in graphic video card may be required to obtain satisfactory performance when previewing multiple channels.

Accessories
SENSORAY offers breakout boards that route the 1012 video and audio signals to standard connectors.

Model 1012TA provides connectors for four 3.5mm audio inputs and eight BNC composite video inputs (includes 953TAC1 cable.)

SEN Model1012TAaSEN Model1012TAb

The Model 953TAC1 cable connects a Model 1012 board to the 1012TA breakout board. One of its three 16-pin connectors plugs into the 1012 board, while one or both of the other connectors can be plugged into breakout boards. (Available as replacement cable)

953TAC1 Cable

 

 

 

 

 

 

 

 

Specifications

Video
Inputs 8 composite, 75 Ohms
Input formats NTSC, PAL
Output formats UYVY/Y422, YUYV/YUY2, RGB555, RGB565
Aggregate capture rate
(maximum)
NTSC: 240 (30x8) frames/sec
PAL: 200 (25x8) frames/sec
Resolution D1 (720x480 NTSC, 720x576 PAL)
SIF (352x240), 2SIF (704x240), 4SIF (704x480)
VGA (640x480), QVGA (320x240), QQVGA (160x120)
CIF (352x288), QCIF (176x144), SQCIF (128x96), 4CIF (704x576)
Audio
Inputs 8 mono, line level
Output format PCM
Resolution 16 bits
Sample rate 8, 16, 32, 44.1, or 48 kHz
Environmental
Bus PCI-Express Mini x1, compliant with PCI-Express base specification rev 1.1/2.0
Input power <1w 3="" 3v="" 300ma="" td="">
Operating temperature 0 - 70 °C (Standard/Commercial version)
-40 °C to +80 °C (Extended/Industrial version)
Mechanical dimensions 50.95mm x 30mm
Feel free to request a quote